I finished my 2x72 Belt Grinder Prototype

Hey All! I am back with a post about my 2x72 Belt Grinder Prototype. I had a lot of fun with this one. It is made from tube steel and plate. Easy to source materials and tilts 90 degrees. I had to take some beauty shots of it grinding and throwing some sparks. Hope you all are having a great Friday. Plans are available if you would like to purchase them. Here is the link to the plans: http://bit.ly/2T1raIy (with this link it knocks $20 off at checkout) Thank you to all who contributed to this project. :rocker:

https://youtu.be/Fl7OviBZqdY

It looks a great machine, but would it be possible to actually see it?
Atmospheric lighting is OK for cinema but for a machine tool - nah.

Sure, I have an entire series of videos on the concept, design, prototyping, building, testing etc. It’s pretty comprehensive. However if you want to see the machine the full tear down video is a good start: The Anatomy of a Home Built DIY 2x72 Belt Grinder For Knifemaking
https://youtu.be/89PScwdX5Qw

- Brian