https://youtu.be/9_uT5IkX3yo
Printable View
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks My MiniCrafts! We've added your Drill Chuck to our Drilling and Drill Presses category,
as well as to your builder page: My MiniCrafts's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-drill-chuck"> <img src="/uploads/259393/homemade-drill-chuck.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-drill-chuck">Drill Chuck</a> <span> by <a href="https://www.homemadetools.net/builder/My+MiniCrafts">My MiniCrafts</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/chuck'>chuck</a>, <a href='https://www.homemadetools.net/tag/drill'>drill</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
I am curious as to why you felt you needed to do that? Is that the only chuck you have that can chuck a drill bit of that size, even with the reduced shank?Quote:
Originally Posted by My MiniCrafts
It is a good demonstration of how to make a custom faceplate, though! Use an M12x1 tap and appropriate tap drill, and you could have mounted it on a Unimat DB or SL, or with a 3/4"x16 tap, on some of the smaller old American hobby lathes. Not that there'd be room to spin it in the smaller Unimats, but the process is exactly the same. ;)
Bill
It's probably more of an entertaining video. Actually, it doesn't make much sense. I also plan to use this adapter on my milling machine.
You should try this with the larger bit on steel. The extra rotating mass of the lathe chuck may help, especially at the end of the cut.
Thank you. Theoretically, this makes sense.
Using it on the mill makes good sense. And anything else it will work on is just a bonus!Quote:
Originally Posted by My MiniCrafts
Bill
I have an R8 to 3 jaw chuck adapter for my mill. It's not super practical. I've used it about twice in my life. You need to spin oddball stuff every once in a while.
Sometimes there is a need