Improved Socket Organizers for Your Tool Chest for Free!

The space in most of our tool boxes is limited. Socket clips are a pain when it comes to removing sockets. Commercial socket organizers take up too much space and often have pegs for sockets we don't have or need.

I am dealing with this problem by making my own socket organizers out of some pieces of scrap hardwood floor I have on hand. I lined up all the sockets on a bench, measured the length of the row, and measured the largest and smallest sockets. Drilled large and small holes at the ends, and cut between them with a bandsaw. Then glued the blade gap shut.

The photos show the difference in drawer space required for regular vs. home made socket organizers. Due to the drawer height, I didn't put a base under the wooden racks to lift them out, but you could.

Most of us can recognize a socket size by looking at it and don't need labels. Just use different racks for inch and metric.

Attachment 37952 Attachment 37953 Attachment 37954

I have that very same problem and this solution is how I'm going to fix it. Thanks for the great idea.

ancient Sidchrome socket sets did something similar, but made of folded sheet metal. The sheet metal was about 0.5mm thick, and simply folded into a tapered tray shape with the ends spotwelded closed.

That is the method I plan to make for some of my installs, and the thinner floor material overcomes the height issue described above.

Des

Great idea!

I once made an organizing tray for my roll around toolbox at work using some scrap 3/8" plywood. I literally glued it together with a hot glue gun and then sprayed it with Duplicolor aerosol truck bed liner. I didn't have very high expectations for it lasting very long, but to my surprise it lasted several years and was still very solid when I passed it on to someone else. What surprised me most was that the cheap truckbed liner was still intact and showed no signs of chipping or peeling.

<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks tmate3! We've added your Socket Organizer to our Storage and Organization category,
as well as to your builder page: tmate3's Homemade Tools. Your receipt:

<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-socket-organizer-7"> <img src="/uploads/243484/homemade-socket-organizer-7.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-socket-organizer-7">Socket Organizer</a> <span> by <a href="https://www.homemadetools.net/builder/tmate3">tmate3</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/socket'>socket</a>, <a href='https://www.homemadetools.net/tag/organizer'>organizer</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->

That looks like a good idea. But my socket drawer is FULL. I mean really full.

I think it could be improved upon with some thin gauge (1/16"), aluminum angle, 1/2" or 3/4" size. One length of angle and notch it (BIG notch) at one end for the small end then bend it around the smallest socket. Then at the large end remove the bottom side of the angle, leaving a tab to create a semi-circular, wrap-around on that end. Use a tab from both sides. Again, bend first one side tab around the largest socket and then bend the other side tab over that first one. Let the overlap of the two side tabs hold it together. Or add some epoxy or other glue between them. That would make the sides thinner and waste less space.

I agree that you do not need the size markings on the holder. I don't remember what sizes fit which bolts anyway so I usually just grab one, try it, and repeat until I have the correct socket.

Somewhere on this planet is a large pile of 10mm sockets. I see you are missing yours as well.

I just moved my box of random sockets onto a set of Harbor Freight organizers. You're right they are too big, but wow it's nice to have them where you can find them instead of rooting around in the box for 5 minutes.

I like your design. Do you have anything good for sorting wrenches?

Quote:

---

Originally Posted by Elizabeth Greene

I just moved my box of random sockets onto a set of Harbor Freight organizers. You're right they are too big, but wow it's nice to have them where you can find them instead of rooting around in the box for 5 minutes.

I like your design. Do you have anything good for sorting wrenches?

---

Not I, that's for sure! It started well enough.
Collected all the loose tools, chiefly are wrenches. Began sorting them. Imperial, metric, sockets, deep sockets, impact sockets, 6 point, 8 point, 12 point, adjustable, combination, double open end, double box end, offset, pipe, strap, chain, starter-generator, S pattern, service, oversize, spud, ratcheting single end, ratcheting double end, nut drivers, handled hex keys, distributor (2 vehicles), and the specialties for certain equipment, i.e. I like 3/4'' x 7/8'' box end on the Bridgeport pattern mill, 1/2'' x 9/16'' for lathe compound and carriage stop, etc.

The table (10' walk ramp on sawhorses) is full, sorting mostly done. Next step seems to be making up sets, and returning orphans to their logical group. Not difficult with sockets and combination wrenches, no clue on the various formed types. May be forced into adopting shadow boards, a concept I don't like, regardless promotion by yay-sayers.

Admittedly, it's the A-frame space eating cart I don't like. Hinged panels like a rug display, or sliding hardware store type...... but not consuming floor space.
And foam? NWIH, worst of all, I mean is everyone right handed? It's clumsy, expensive by virtue of needing drawers in cabinets - that some tools won't even fit. That's all before going insane cutting out little pockets.

I try to keep at least one set of every size wrench where I can find them without having to paw through multiple tool boxes.

Top is Imperial (inch), bottom is metric. Big wrenches are in drawers, as they take up too much wall space.

Attachment 45146

A very nice idea, thanks for publishing. I had made some similar, from sheet metal. I found it useful to store some of the sockets upside down, as a coarse "index." Each 5 mm and 1/4 inch works for me. It's very easy to get the size you want with fewer false picks.