Free 186 More Best Homemade Tools eBook:  
Get 2,000+ tool plans, full site access, and more.

User Tag List

Results 1 to 2 of 2

Thread: Improvements to a pin vise

  1. #1
    Supporting Member mklotz's Avatar
    Join Date
    Aug 2015
    Location
    LA, CA, USA
    Posts
    3,434
    Thanks
    357
    Thanked 6,379 Times in 2,117 Posts

    mklotz's Tools

    Improvements to a pin vise

    On a recent thread...

    http://www.homemadetools.net/forum/s...pin-vise-65438

    I mentioned adding a free-wheeling spinner to a pin vise to allow full rotation of the object held in the vise. After writing this I realized that I hadn't yet shown an example of what I was describing.

    Shown below is a pin vise that uses a 3/8" geared chuck. [Obviously for the upper end of the "pin" spectrum.] I threaded a short bit of steel to match the chuck thread and mounted that in a large file handle. I purposely left the steel long so that I could mount a length of freely-turning hex steel between the handle and the chuck. This can be held in the fingers while the other hand turns the handle to grind cylindrical objects or it can be grasped in the vise so that turning the handle presents all aspects of the workpiece for filing, grinding, polishing, etc.

    It quickly became obvious that the hex spinner would benefit greatly from a handle so I added a removable handle to it. The first picture shows the components. The large nut is used as a lock nut to secure the chuck to the steel rod.



    And here's what it looks like when all assembled.



    186 More Best Homemade Tools eBook
    ---
    Regards, Marv

    Home Shop Freeware
    https://www.myvirtualnetwork.com/mklotz

  2. The Following 6 Users Say Thank You to mklotz For This Useful Post:

    baja (Sep 22, 2020), Jon (Jan 3, 2018), Paul Jones (Jan 3, 2018), Seedtick (Jan 3, 2018), Sleykin (Sep 27, 2020), Tonyg (Sep 25, 2020)

  3. #2
    Content Editor
    Supporting Member
    DIYer's Avatar
    Join Date
    Aug 2013
    Posts
    3,056
    Thanks
    772
    Thanked 1,850 Times in 1,652 Posts


    Thanks mklotz! We've added your Pin Vise Modification to our Workholding category,
    as well as to your builder page: mklotz's Homemade Tools. Your receipt:




    2000 Tool Plans

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •