Hello all, I found this place a little while back, and decided to finally join.
Printable View
Hello all, I found this place a little while back, and decided to finally join.
Hi LeeRoy - welcome to HomemadeTools.net :welcome:
What's next up on your projects list?
Probably going to start with a foundry and forge for myself. I have things to cast and things to forge. I have a feeling I will be helping someone build a foot powered helve hammer, too. My most immediate requirement is to cast an intake manifold for a motorcycle I am building.
Has anybody built the machine tools from the Gingery series of books?
Hi LeeRoy,
Welcome - glad to have you here! :welcome:
I think you'll find that the Gingery books are quite popular. What sort of bike is that intake manifold meant to fit?
Ken
That's good to know, I have a feeling I will have a lot of questions. The intake is for a Virago 700, with a 38mm Dellorto tickler carb.
Interesting project you have in the pipeline LeeRoy! Do post it up when you get to build it. :welcome:
It currently has about 3' of the original frame tubing left, not counting the neck. Gooseneck backbone, and a girder front end are in the works, too. Its Konged to within an inch of its life, 20" seat height. I have to get some pics and post it in a couple of places.