Large Radius folding/rolling brake for sheet metal

DIY Sheet metal Rolling Brake Table - Kustom's by Kent

This is a folding table style sheetmetal brake, but is setup for doing large radius bends, 1" radius, 3.5" radius, and 6"+ for aluminum fuel tanks.

It is consistent, and fairly simple to use, but getting it to work took some effort and design. I can easily change out to different mandrels for different radii.

Thanks
Kent

<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks KustomsbyKent! We've added your Large Radius Rolling Brake to our Brakes and Presses category,
as well as to your builder page: KustomsbyKent's Homemade Tools. Your receipt:

<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://www.homemadetools.net/homemade-large-radius-rolling-brake"> <img src="/uploads/166857/homemade-large-radius-rolling-brake.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://www.homemadetools.net/homemade-large-radius-rolling-brake">Large Radius Rolling Brake</a> <span> by <a href="http://www.homemadetools.net/builder/KustomsbyKent">KustomsbyKent</a></span> </div> <div class="tags">tags: <a href='http://www.homemadetools.net/tag/brake'>brake</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->