-
5 Attachment(s)
LATHE HANDWHEEL
I made this handwheel to make it easy to turn short threads up to a shoulder on my lathe. The Handwheel simply slips into the headstock on tightens up with an expanding arbor as shown. I find it most useful for very short threads and very convenient in allowing you to stop threading in the exact same spot each time. If you have a gearhead lathe besure to select a higher speed which will reduce the effort you need to exert to turn the crank ;-)
The handwheel itself was salvaged from an old piece of machinery and I simply made a suitable expanding arbor so it could perform its new function.
Gerald
-
Thanks backyard_cnc! We've added your Lathe Handwheel to our Lathe Accessories category, as well as to your builder page: backyard_cnc's Homemade Tools. Your receipt:
<div id="blocks">
<div class="block b1 pngfix">
<div class="bimg">
<div>
<a href="http://www.homemadetools.net/lathe-handwheel-2"><img src="http://www.homemadetools.net/uploads/141839/lathe-handwheel-2.jpeg"
/></a></div>
</div>
<div class="head pngfix"></div>
<div class="left pngfix"></div>
<div class="right pngfix"></div>
<div class="blockover b1 pngfix">
<div class="title">
<a href="http://www.homemadetools.net/lathe-handwheel-2">Lathe Handwheel</a>
<span> by <a href="/builder/backyard+cnc">backyard cnc</a></span>
</div>
<div class="tags">tags: <a href="http://www.homemadetools.net/tag/lathe">lathe</a>, <a href="http://www.homemadetools.net/tag/handle">handle</a>, <a href="http://www.homemadetools.net/tag/wheel">wheel</a></div>
</div>
</div>
</div>