Printable View
Hi guys; Here is my homemade lathe milling attachment. made out of .750 mild steel plate. It doesn't get used to often, the main use of it is for cutting the ejector groove in rifle barrels. that reminds me I should post a couple rifles I have built. Attachment 6253Attachment 6254Attachment 6255
Clean work!
I like the larger jaws on your version. Also, did you make the 5C collet chuck mounted on your lathe?
Very Nice. i have been thru Sheridan a few times.
Quote:
Originally Posted by turntable
I like, bat very clier
Hay Paul; Yes. the collet chuck was made out of a old 1 1/2 double row drive sprocket for the 3d cam lock and the center part for the collet was made out of 0-1 tool steel hardened and drawn to RC 59. sure is a handy attachment.
Yes, a 5C collet chuck is on my "future" list of improvements for my 12" swing lathe. I have a ER32 collet chuck on my 7" swing mini lathe. I rarely remove it because it is so useful. This collet chuck can be adjusted to less than 0.001" TIR when all the run-out errors including those from the spindle and collets are combined.
Thanks turntable! We've added your Lathe Milling Attachment to our Lathe Accessories category, as well as to your builder page: turntable's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://www.homemadetools.net/lathe-milling-attachment-5"><img src="http://www.homemadetools.net/uploads/135230/lathe-milling-attachment-5.jpeg"/></a></div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://www.homemadetools.net/lathe-milling-attachment-5">Lathe Milling Attachment</a> <span> by <a href="/builder/turntable">turntable</a></span> </div> <div class="tags">tags: <a href="http://www.homemadetools.net/tag/milling">milling</a>, <a href="http://www.homemadetools.net/tag/lathe">lathe</a>, <a href="http://www.homemadetools.net/tag/fixture">fixture</a></div> </div> </div> </div>
Nice build you have done here, however (tongue in cheek), if you don't know the difference between an 'ejector' and an 'extractor' then perhaps you shouldn't be fiddling with guns.
Turntable,
I have been studying your photos of the milling attachment and noticed the addition of lathe way wipers to the cross slide.
How did you make these? What type of material did you use for the flxible wipers? Do you have more detailed photos?
Very nice workmanship,
Thank you for posting, Paul Jones
great work.i like it
I like milling adapter, nice and simple. I made one similar, but not nearly as pretty. What I am REALLY envious of it that cross slide with the flat wide top. Did that come with the machine or did you make that? What material is it made from?
