Lathe safety/stupidity accident video

A non-graphic lathe safety video originally featured on the excellent Safety Engineering Network.

This is in contrast to a previous video showing a worker accidentally pulled into a lathe.

Habit-wise, it also stands in contrast to another previous video we've featured showing a worker falling on a construction site. In that previous video, the worker was doing something we've likely all done before: climbing a ladder while carrying something. This video demonstrates something I've never seen, or even heard of, anyone doing before.

In this short video, entitled "I fought the lathe and the lathe won", nobody is seriously hurt. In fact this would be an excellent video to show to people first being introduced to working on a lathe. A young gentleman of questionable intellect, assisted by his similarly-challenged comrades, attempts a contest of strength against a lathe.

https://www.youtube.com/watch?v=0PzPfzLeDa0

The ID10T that turned the lathe on...dunno probably should be somethinged, let a lone the maroon with the chuck key. Not sure if a Machine Safety training video could be produced that would stop Twiticizm. When I was a Safety officer I once caught the production manager standing on a roll around swivel chair changing an 8' florescent light in his office...whatcha gonna do¿

Thankfully nature has a way of culling ones like that from 'the herd' to prevent less desirable traits/genes from being passed on to future generations.

Seedtick

I went to a trade/college prep high school and we had shockingly few injuries in the time I was there. I saw a few dumbbells get hurt, but with all of the spinning, sharp, flaming things we were exposed to, not one of us was killed. Some fairly serious injuries, yes, but far fewer than you might expect.

Thanks for this video,
A the time I was an apprentice, it was never possible for us to make such an idiot thing, first you can never stay without working when a professor was not with us at work or in school, they explain us that if we are not dead if we make such idiot thing, they kill us personally, now they think a lathe is a toy and as on the games you are never dead or injured…

A few years ago there was a case where someone hired a worker to do some carpentry. That guy proceeded to use a table saw as part of the job. He used the saw with no guards, and the blade set at its maximum height, to rip some thin stock. He slipped and fell onto the blade and was severely injured. He then proceeded to sue everyone in sight. Instead of being kicked out of court and exposed for the idiot that he is, he was awarded a million dollars. Unfortunately nature doesn't always cull the idiots. Sometimes they are rewarded for their behavior and the rest of us pay the price. Even worse, they spawn, and vote.
In the same vein, the internet gives too many fools a way to spread their stupidity. YouTube can be a great tool, but I've also seen a lot of dummies with just enough knowledge to be dangerous. If I were king there would be licensing tests that you would have to pass before you could proceed to that step. Like power tool usage tests, more stringent driving tests, and some kind of licensing to qualify for parenting, to name a few.

Quote:

---

Sometimes they are rewarded for their behavior and the rest of us pay the price. Even worse, they spawn, and vote.

---

Priceless! Thanks Made my Day! ~PJ

Quote:

---

Originally Posted by Pa1963

and some kind of licensing to qualify for parenting, to name a few.

---

I'm you there

¨A non-graphic lathe safety video¨

A video (or a picture) IS a graphic. It is what graphic means, media commenters nonwithstanding.

Among many such, another media-fed reversal of meaning is the now common use of ¨decimate¨. For centuries, the meaning of the Greek word was the equivalent of ¨diminish by 10%¨ - for example, to behead every tenth prisoner.

In this case, term 'graphic' is a definition refering to gore, which this video hasn't.
I'd invite any young buck tussle one green Pacemaker at left, in avatar. I'd even select lowest RPM, heck it's only 35. . .Graphic would be plenty evident then, compared with dinky little Victor or Jet.

Quote:

---

Originally Posted by Toolmaker51

In this case, term 'graphic' is a definition refering to gore, which this video hasn't.
I'd invite any young buck tussle one green Pacemaker at left, in avatar. I'd even select lowest RPM, heck it's only 35. . .Graphic would be plenty evident then, compared with dinky little Victor or Jet.

---

If by ¨graphic¨, gore was meant, then gore should have been used. Gore is a perfectly good and honest word. Graphic, on the othe hand, has become a vague word with many meanings in the way it´s now used. It also has an exact meaning... That big green thing wouldn´t fit in my shed - it barely houses my c1900 14x38 Hendey. Planning on building a 40x40 shop if time permits. My time on earth, that is.

40' x 40' is a worthy size. What I hankered for too, one long, long time.
Big green thing? Only a svelte 9300 lbs of 16" x 54".
Shamefully, I awaited photo-opportunity for that effect. With snow on the ground, none of the other shots worth saving. Filed some copies, but the original's titled 'Skyline', as in day I altered ours.
Well, a 80' mobile crane helped some...

Quote:

---

Originally Posted by PJs

The ID10T that turned the lathe on...dunno probably should be somethinged, let a lone the maroon with the chuck key. Not sure if a Machine Safety training video could be produced that would stop Twiticizm. When I was a Safety officer I once caught the production manager standing on a roll around swivel chair changing an 8' florescent light in his office...whatcha gonna do¿

---

Hello that would have got the hairs on the back of your neck moveing! We had a worker who was rather short and when he was useing a 9"Grinder to grind off old paint & undercoat from inside a steel shed he thought it was a Good idea to Stand on 2 X Plastic Milkcrates and use one hand holding the on button with that one arm extended up and when the Grinder Snapped back and nearly cut him to Pieces.Ladders were available and assistants But as Einstein said "Stupidity has No Limits!" Consequently the Company proceeded to Ban all use of 9"Grinders which the Welders & Boilermakers Objected Strongly.

In high school shop class a few things happened and you were never allowed back. This guy is lucky he didn't get torn to bits.