Link forming pliers - GIF

Link forming pliers.

<video controls autoplay loop> <source src="https://diqn32j8nouaz.cloudfront.net/link_forming_pliers.mp4" type="video/mp4"> Your browser does not support the video tag. </video>


Previously:

https://www.homemadetools.net/forum/...525#post177942
https://www.homemadetools.net/forum/...753#post129041
https://www.homemadetools.net/forum/...163#post134570
https://www.homemadetools.net/forum/...900#post124623
https://www.homemadetools.net/forum/...999#post176015
https://www.homemadetools.net/forum/...822#post175211

what are oval links used for?

Quote:

---

Originally Posted by Tooler2

what are oval links used for?

---

One typical use for links like this is in making jewelry.

Quote:

---

Originally Posted by clavius

One typical use for links like this is in making jewelry.

---

that makes sense, do they then cut them to link them together?

Quote:

---

Originally Posted by Tooler2

that makes sense, do they then cut them to link them together?

---

Well, I am very far from being an expert, but I think typically if you were making a chain you would make a bunch of these, then link two with a round ring you solder shut, and then stretch every other round link into an oval as shown. I'm guessing that this was just to demonstrate the tool. But there is no reason you could not do as you say and cut the oval, add a link, and then solder it closed again.


With all of the holes in the jaws I could see this being used with say four pins to make square shapes, three to make triangles, etc.