Free 186 More Best Homemade Tools eBook:  
New: 300+ fresh build posts/day from 275 forums → BuildThreads.com

User Tag List

Results 1 to 5 of 5

Thread: Loader repair near disaster - GIF

  1. #1
    Supporting Member Altair's Avatar
    Join Date
    Aug 2013
    Posts
    12,020
    Thanks
    1,365
    Thanked 31,320 Times in 10,051 Posts
    New: BuildThreads.com - 300+ build posts/day (with photos)

  2. The Following 3 Users Say Thank You to Altair For This Useful Post:

    durrelltn (Jun 26, 2022), nova_robotics (Jun 21, 2022), Rangi (Jun 24, 2022)

  3. #2
    Supporting Member
    Join Date
    Sep 2018
    Posts
    2,923
    Thanks
    13,831
    Thanked 1,782 Times in 1,004 Posts

    nova_robotics's Tools
    A buddy of mine did this exact thing. Support the machine with the hydraulics then start loosening off the hydraulics. Genius.

  4. The Following User Says Thank You to nova_robotics For This Useful Post:

    elk-a-holic (Jun 25, 2022)

  5. #3
    Supporting Member bob_3000's Avatar
    Join Date
    Aug 2020
    Posts
    1,015
    Thanks
    606
    Thanked 418 Times in 308 Posts
    Dude on the left just took a step back to watch the outcome...clearly not a close friend.

  6. The Following User Says Thank You to bob_3000 For This Useful Post:

    mdhatter3 (Jun 21, 2022)

  7. #4
    Supporting Member Frank S's Avatar
    Join Date
    Aug 2015
    Location
    Peacock TX
    Posts
    12,617
    Thanks
    2,677
    Thanked 11,111 Times in 5,391 Posts

    Frank S's Tools
    If you guys will look real close you will see that the bucket is laying on a dump body or a box, 4 crane slings are attached to it in an attempt to lift it off of what it is resting on. The loader is most likely broke down otherwise why the cables. They can't lift the bucket and the front of the loader so the guy has loosened off the lift cylinder lines, these would be the lines going to the rod end of the cylinders allowing them to extend. In no way can the machine ever get lower to the ground than the natural ground clearance as long as the tires are not flat. The only danger the mechanic was in would have been an oil bath but that oil could be scalding hot
    Never try to tell me it can't be done
    When I have to paint I use KBS products

  8. The Following User Says Thank You to Frank S For This Useful Post:

    Rangi (Jun 24, 2022)

  9. #5
    Supporting Member hemmjo's Avatar
    Join Date
    Feb 2017
    Posts
    3,301
    Thanks
    410
    Thanked 2,131 Times in 1,230 Posts

    hemmjo's Tools
    Quote Originally Posted by Frank S View Post
    If you guys will look real close you will see that the bucket is laying on a dump body or a box, 4 crane slings are attached to it in an attempt to lift it off of what it is resting on. The loader is most likely broke down otherwise why the cables. They can't lift the bucket and the front of the loader so the guy has loosened off the lift cylinder lines, these would be the lines going to the rod end of the cylinders allowing them to extend. In no way can the machine ever get lower to the ground than the natural ground clearance as long as the tires are not flat. The only danger the mechanic was in would have been an oil bath but that oil could be scalding hot
    Or, if he had his foot under the tire. But I agree, they were planning in the machine settling down when he loosened the fitting. They need to free the truck that was trapped under the bucket.



    2,500+ Tool Plans

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •