Printable View
A Carriage Stop for my Logan 11" Turret lathe. Made from 6061 Alu, 316 Stainless clamp plate, Brass Dial, Drill Rod shaft. Made from scrap from around the shop. Contact me for drawings and I will email.Attachment 1312Attachment 1313Attachment 1314Attachment 1315Attachment 1316Attachment 1317
Thanks Catfish! I've added your Lathe Carriage Stop to our Machining category, as well as to your builder page: Catfish's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="/lathe-carriage-stop-2"><img src="/uploads/77476/lathe-carriage-stop-2.jpeg" alt="Lathe Carriage Stop" /></a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="/lathe-carriage-stop-2">Lathe Carriage Stop</a> <span> by <a href="/builder/Catfish">Catfish</a></span> </div> <div class="tags"> tags: <a href="/tag/lathe">lathe</a>, <a href="/tag/carriage-stop">carriage stop</a> </div> </div> </div> </div>
Thanks, that looks exactly like what I need. I would appreciate the drawings you mentioned in your post. I want to adapt it to a 7x10 mini lathe. John jgairguns@sbcglobal.net
Very nice, I made a very crude stop out of cast iron, please email your drawing, it's time for an upgrade!
Rnjtalbott@gmail.com
Great stop, Catfish. Turned out really well.
can you send a set of drawings to kingerswa@frontier.com
Thanks
Hey Catfish! Nice stop. I'm pretty new to lathe work so haven't got one of these made yet. Be cool to see the drawings if you can send them to me. Thanks a lot : )
peterphilipfowler@gmail.com
Yes I would also appreciate you sending me the drawings to make one. This is very nice and a lot better than my present one! Thank you, saguto@gmail.comQuote:
Originally Posted by jgairguns
I know where Mariposa is, I worked in Yosemite during the summer of 60 and 61 while going to school. I would love a set of drawings. rbutlerr@charter.net Hope to adapt to my 1024 Jet. Thank you for your hard work. RonQuote:
Originally Posted by Catfish
I would like a set of drawings, too, please.
Thanks
Joe M.
toyman@sbcglobal.net
Sent to your email.
Link to plans. https://www.dropbox.com/s/uudgkx3561...0Stop.pdf?dl=0
Please send plans
Thank you
Bryanbdp@comcast.net
bryanbdp - the download link is working. Here it is again: https://www.dropbox.com/s/uudgkx3561...0Stop.pdf?dl=1
Hi. How is the stop tightened onto the lathe bed? Do you need an Allen wrench to snug into place? I get the wheel for fine adjustments...
I too would like a set of drawing for the carriage stop. Thank you in advance. ronnierunyon@att.net
