Low(and high) profile clamps for the milling mc table.

Low profile clamps are available commercially but my high profile clamp, called that because they are based on one of my low profile clamp's design I think are unique. This, unless you compare them to the two piece vices which are available.

There are five designs of the low profile clamps so you have a choice of which to make.
https://www.youtube.com/watch?v=yozg495MIzg

The pages on my website relating to these can be found here

There is just one design for the high profile clamps.
https://www.youtube.com/watch?v=NL6lNX_gA3Y

The pages on my website relating to these can be found here

Harold Hall

Thanks Metaler! We've added your High Profile Clamp to our Clamps category,
as well as to your builder page: Metaler's Homemade Tools. Your receipt:

<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://www.homemadetools.net/homemade-high-profile-clamp"> <img src="https://www.homemadetools.net/uploads/237550/homemade-high-profile-clamp.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://www.homemadetools.net/homemade-high-profile-clamp">High Profile Clamp</a> <span> by <a href="http://www.homemadetools.net/builder/Metaler">Metaler</a></span> </div> <div class="tags">tags: <a href='http://www.homemadetools.net/tag/clamp'>clamp</a> </div> </div> </div> </div>

Thanks Metaler! We've added your Low Profile Clamps to our Clamps category,
as well as to your builder page: Metaler's Homemade Tools. Your receipt:

<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://www.homemadetools.net/homemade-low-profile-clamps-3"> <img src="https://www.homemadetools.net/uploads/237649/homemade-low-profile-clamps-3.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://www.homemadetools.net/homemade-low-profile-clamps-3">Low Profile Clamps</a> <span> by <a href="http://www.homemadetools.net/builder/Metaler">Metaler</a></span> </div> <div class="tags">tags: <a href='http://www.homemadetools.net/tag/clamp'>clamp</a> </div> </div> </div> </div>

I made some of these clamps a couple of years ago for my little bench mill and they have been a real boon. Thank you Harold!