-
Machine bases from scrap
My jointer and thicknesser need to be moveable on casters. They get pulled out into an open area for use and then 'parked' in the corner when I'm finished with them.
The jointer was living on a general purpose wooden dolly I made years ago, but this was not purpose built so it didn't really grip the jointer base well, or fit it well, or have locking casters for safer use of the machine. The thicknesser had a set of three wheels that it came with, but it did not travel sideways. A bit of a pain in my small workshop!
So, I gathered some recycled steel, some casters old and new, and using just about every metalwork tool in the workshop, I welded up, machined, and spray painted some better machine bases with locking casters:
https://youtu.be/TZOcUjzzK1M
The video is quite detailed, but please let me know below if you would like any more info.
Cheers!
Craig
-
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks craig9! We've added your Machine Bases to our Dollies and Stands category,
as well as to your builder page: craig9's Homemade Tools. Your receipt:
<div id="blocks">
<div class="block b1 pngfix">
<div class="bimg">
<div>
<a href="https://www.homemadetools.net/homemade-machine-bases">
<img src="/uploads/226640/homemade-machine-bases.jpeg"/>
</a>
</div>
</div>
<div class="head pngfix"></div>
<div class="left pngfix"></div>
<div class="right pngfix"></div>
<div class="blockover b1 pngfix">
<div class="title">
<a href="https://www.homemadetools.net/homemade-machine-bases">Machine Bases</a>
<span> by <a href="https://www.homemadetools.net/builder/craig9">craig9</a></span>
</div>
<div class="tags">tags:
<a href='https://www.homemadetools.net/tag/portable'>portable</a>, <a href='https://www.homemadetools.net/tag/stand'>stand</a>, <a href='https://www.homemadetools.net/tag/casters'>caster(s)</a> </div>
</div>
</div>
</div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
-
Thank you DIYer, much appreciated!
I have a table saw base to build as well, soon. That will be a bit more involved. I hope to make space under the table saw wings for some storage cabinets. I also hope to incorporate some levelling feet into the design.
Cheers,
Craig