MAKING HOMEMADE TAPE MEASURE CORNER READER.
baja (02-01-2021), FEM2008 (01-28-2021), garage nut (01-29-2021), hegefer (01-28-2021), Inner (01-28-2021), Jon (01-27-2021), nova_robotics (01-31-2021), Priemsy (01-28-2021), raynjer (01-31-2021), Toolmaker51 (02-15-2021), will52100 (01-28-2021), yumastepside (01-28-2021)
Thanks orioncons36! We've added your Tape Measure Helper to our Measuring and Marking category,
as well as to your builder page: orioncons36's Homemade Tools. Your receipt:
Nice job, we all like to make tools to make the job easier. It always seems there is one thing left on the truck when we are on the third floor.
An quick solution to this problem is place end of tape in corner make a mark at 10" reverse tape to other corner measure to the 10" mark and add 10" to reading.
Reading from corner to 10" mark 67 7/16"+10"=77 7/16".
FEM2008 (01-28-2021), raynjer (01-31-2021), that_other_guy (01-29-2021), Toolmaker51 (02-15-2021)
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks