Making a caliper depth base

[Guy Marsden]

I needed a depth base for my calipers. I found a Mitutoyo for over $50 and an iGaging for under $20. But it was more fun to make my own - it came out pretty good! This one is 3" wide which seems to be the standard size and I might make a wider one in the future.

[DIYer]

Thanks Guy Marsden! We've added your Caliper Depth Base to our Measuring and Marking category,
as well as to your builder page: Guy Marsden's Homemade Tools. Your receipt:

Caliper Depth Base by Guy Marsden

tags: caliper, base