MAKING HOLE SAW DRILLING JIG!!

[orioncons36]

Drill holes if center bit is broken, make wood circles without center hole for crafts, make u-shaped holes.

[DIYer]

Thanks orioncons36! We've added your Hole Saw Drill Guide to our Drilling and Drill Presses category,
as well as to your builder page: orioncons36's Homemade Tools. Your receipt:

Hole Saw Drill Guide by orioncons36

tags: drilling, guide

[Isambard]

Would be more useful if the two arms were made adjustable, to accommodate varying diameter hole saws.
BTW I run a piece of drill rod in my hole-saw mandrels, drill the hole with another drill...

[dbat74]

Where we come from we just put another drill in the saw.

[Isambard]

My mistake, I thought it was obvious why I prefer to run a plain piece of drill rod in a holesaw...

[Frank S]

Isambard I have several of my larger hole saws fitted with 1/4" drill rod as well. A couple of my over 5" hole saws solid arbors with a 3/8: pilot. One of my saws is fitted with a #3 MT for the drive arbor

[Isambard]

Isambard I have several of my larger hole saws fitted with 1/4" drill rod as well. A couple of my over 5" hole saws solid arbors with a 3/8: pilot. One of my saws is fitted with a #3 MT for the drive arbor

[dbat74]

Ihat's what I was thinking also.