Making a Model 2-Stroke Engine

https://youtu.be/VCu0qXbSKOE

Hi all,

I've started building a model 2-stroke engine, using the Atom Minor Mark III kit. In this video I machine the crankcase.

Cheers,
Paul.

https://youtu.be/pxFpui9g_fg

Hi all, here's the second part in the series. I make the main bearing and backplate in this one.

Cheers,
Paul.

https://youtu.be/_6XBDNxggig

Here's the third part in the series. Crankshaft and cylinder barrel completed.

Cheers,
Paul.

https://youtu.be/waGBLyj-9VE

Here's the fourth part in the series. I make the jet tube and cylinder head in this one.

Cheers,
Paul.

https://youtu.be/YgeN5HNpLco

Here's the fifth part in the series. I make the piston in this one, which required an OD lap.

Cheers,
Paul.

https://youtu.be/9IOSqFz5VsU

Here's the sixth part in the series. I make a conrod, rotary valve and a gudgeon pin.

Cheers,
Paul.

https://youtu.be/OtLi-EZIh_A

Hi all,

Here's the final part of the series, where I make the last few parts for the engine, assemble it and attempt to start it.

Cheers,
Paul.