Material Holding Drawer

Material Holding Drawer. Made from sheet metal and rivets





Attachment 21526Attachment 21527Attachment 21528.

very nice
I wish I could role metal that nice.

Neat. And solid!
What are you going to put them into?

Cheers Phil

Hello ncollar, make yourself a press brake. thanks......


12bolts hi, I made a wood shelf for my cutoff pieces but they kept falling off on the floor so I made these drawers. thanks for asking.
I make a lot of small parts so I keep my cutoffs for my next projects. thanks guys... Cap friend request?

<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks Captainleeward! We've added your Material Holding Drawer to our Storage and Organization category,
as well as to your builder page: Captainleeward's Homemade Tools. Your receipt:

<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://www.homemadetools.net/homemade-material-holding-drawer"> <img src="/uploads/209190/homemade-material-holding-drawer.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://www.homemadetools.net/homemade-material-holding-drawer">Material Holding Drawer</a> <span> by <a href="http://www.homemadetools.net/builder/captainleeward">Captainleeward</a></span> </div> <div class="tags">tags: <a href='http://www.homemadetools.net/tag/storage'>storage</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->

Nice construction, great idea, thanks for posting.

Ralph

Hello ncollar, make yourself a press brake.


Captain
I'm kid of lost, press brake??
Nelson

Hello Nelson, A press brake is a metal structure that allows us to bend sheet metal to a 90* bend. the box I made has 4 90* bends. Cap.

Attachment 21552

Capt
I am just guessing but is on side a male "v" form and the other a female "v" form?
Nelson

Hi, both surfaces are flat and one has hinges on it and folds the sheet metal up 90*

Captain
I see you are using the astric mark * for a degree mark. If you hold the "alt" key down and type on the number pad to the right of the key board 248 then release the "alt" key and it will leave this °.
Enjoy your posts
Nelson

Good to Know Nelson °--° 360 ° friend request ?

thanks Ralph friend request?

There are many symbols under the ALT key, Right down to single digits. If you have some time to waste check it out. It comes from the old doss system in the early days.
Nelson