1 Attachment(s)
Metal Marking Gauge - vernier addition
Hello,
I have just purchased a parallel marking gauge, the metal working style.
It appears to be neatly done and should be quite sturdy but accurate.
http://www.labellenote.fr/file/homem...vernier_01.jpg
But Sadly there is no vernier on this model, so only a mm reading.
http://www.labellenote.fr/file/homem...vernier_02.jpg
So I decided to make this addition. quickly went to my CAD software :
http://www.labellenote.fr/file/homem...vernier_03.jpg
Then printed out the little stamp and, after cleaning up the surface with alcohol, stuck it on the metal.
I then protected the paper with a few drops of CA glue. (adds a little magnifying effect)
http://www.labellenote.fr/file/homem...vernier_04.jpg
And here we go !
http://www.labellenote.fr/file/homem...vernier_05.jpg
Here is a pdf of the vernier, if could be useful to someone.
Attachment 10126