Free 173 Best Homemade Tools eBook:  
Results 1 to 3 of 3

Thread: Metal or Wood Trimmer

  1. #1
    scrdmgl's Avatar
    Join Date
    Oct 2013
    Location
    Toronto, Ontario, Canada
    Posts
    25
    Thanks
    5
    Thanked 41 Times in 15 Posts

    scrdmgl's Tools

    Metal or Wood Trimmer

    I'm sending this pictures to illustrate my design of an Electric Trimmer using a small 1/4", 26,000 rpm, single speed Router. I'm able to control the speed by using a Router Speed Control which is only good for motors without adjustable speed. It uses carbide burrs and adjusting the height of the motor in its base or bracket, you can increase or decrease the amount taken from the part placed in the V aluminum guide.
    Temporarily, the base of the tool is wood bolted to one of my benches but the idea is to set-up the base directly to a bench top. My design is based on a model found in Youtube with very similar features except that the original used an aluminum bracket for the motor and I kept the one included with the router.
    Metal  or Wood Trimmer-burr-trimmer-1.jpg
    Metal  or Wood Trimmer-burr-trimmer-2.jpg
    Burrs used
    Metal  or Wood Trimmer-carbide-burr.jpg
    Metal  or Wood Trimmer-deburring-tool-electronic-speed-control.jpg
    Last edited by scrdmgl; 04-06-2016 at 03:05 PM. Reason: Speed Control Added

  2. The Following 7 Users Say Thank You to scrdmgl For This Useful Post:

    dpederick (11-29-2017), IAMSatisfied (08-13-2019), Jon (03-22-2016), kbalch (03-22-2016), Paul Jones (03-24-2016), PJs (03-24-2016), scoopydo (03-24-2016)

  3. #2
    Content Editor DIYer's Avatar
    Join Date
    Aug 2013
    Posts
    3,091
    Thanks
    433
    Thanked 931 Times in 857 Posts
    Thanks scrdmgl! We've added your Trimmer to our Rotary Tools category, as well as to your builder page: scrdmgl's Homemade Tools. Your receipt:


  4. #3
    IAMSatisfied's Avatar
    Join Date
    Apr 2017
    Location
    The desolate ranch country of Northeastern corner of New Mexico, USA
    Posts
    112
    Thanks
    97
    Thanked 65 Times in 36 Posts
    That looks like it would work well chamfering edges consistently & accurately. Where did you obtain the aluminum Vee extrusion?


    Post your reply!
    Join 33,912 of us and get our 173 Must Read Homemade Tools eBook free.



    173 Must Read Homemade Tools

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •