Milling machine - video

Milling machine. By Debby Novrinal. 13:55 video:

https://www.youtube.com/watch?v=tGKJ9EWEQJc


Previously: https://www.homemadetools.net/forum/...439#post146852

Part 2. 18:03 video:

https://www.youtube.com/watch?v=ROUFGKUYO2w

Part 3. 24:07 video:

https://www.youtube.com/watch?v=OP1Z1ocjDb0

Great workmanship, Jon. I’m looking forward to seeing the end product.

29:22 video:

https://www.youtube.com/watch?v=PCVKiJc0sbQ

20:22 video:

https://www.youtube.com/watch?v=tK1uqTY1UyI

A couple of constructive comments; #1 the shaft that connects between the handwheel and the gear box will have a smoother operational feel if the yolks of the connecting shaft would be clocked to align parallel to each other. #2 I know this is being a bit picky but if some bearing locker lock-tight would be applied to the slip fit bearing races the rotary motion will also feel more precise

27:54 video:

https://www.youtube.com/watch?v=Ip3A5YPWJ80

14:53 video:

https://www.youtube.com/watch?v=22tRloQXQ6s

The man wants shooting! Electric welding in a lathe! To add insult to injury, he assembles with a claw hammer?

Thanks for showing us how well you grind and sand that so helpful.

Spindle. By Debby Novrinal. 35:12 video:

https://www.youtube.com/watch?v=sMEWCtbZ9Wk

The driveshaft yokes are 90º out of phase, if that were an automotive setup, it would doubtful that you would get out of first gear!
Both yokes on the driveshaft need to be inline.

Ram adaptor. By Debby Novrinal. 9:11 video:

https://www.youtube.com/watch?v=hwyABsl7yjg

You made a beautiful thing, but it is fully unclear to me what it is used for.
Regards, Carnel

Milling gearbox. By Debby Novrinal. 38:52 video:

https://www.youtube.com/watch?v=_E8G_n4Po4U

Milling head. By Debby Novrinal. 37:32 video:

https://www.youtube.com/watch?v=GOS4iMwqg9I

Electric accessories and equipment. By Debby Novrinal. 18:39 video:

https://www.youtube.com/watch?v=qnXNV-vrA6c

There is a lot of good work in that machine. Great stuff.