Printable View
Milling a part.
<video controls autoplay loop> <source src="https://diqn32j8nouaz.cloudfront.net/milling_angled_part_ma24.mp4" type="video/mp4"> Your browser does not support the video tag. </video>
Previously:
https://www.homemadetools.net/forum/...793#post223623
https://www.homemadetools.net/forum/...766#post235256
https://www.homemadetools.net/forum/...771#post209924
https://www.homemadetools.net/forum/...106#post195376
https://www.homemadetools.net/forum/...057#post236057
I find myself needing to locate a gooseneck puch die set with 7 inch height 3/4" tip face 10 feet in length for a 250 ton press to air bend 3/8" gr572 material
Should be plenty of those.
More like finding apples growing on a pear tree. than you might think. Lots of 3.5 and fewer 5" nut most 7s are made for sheet metal only capable of 16 ga with 1/4" tip face. Sure made to fit even a 300-ton press break the thin bodies and small tip face means it would fold like tissue paper trying to bend 3/8 thick material.Quote:
Originally Posted by Floradawg
I thought that was a fictitious item. I thought I was making a joke. :)