Mini excavator moves down vertical cliff - GIF

Mini excavator moves down vertical cliff.

<video controls autoplay loop>
<source src="https://diqn32j8nouaz.cloudfront.net/tooltalk_17330150658738.mp4" type="video/mp4">
Your browser does not support the video tag.
</video>


Previously:

Buggy climbing near vertical cliff face - GIF
Car speeds off cliff - GIF
Cliff face breaks off near climbers - GIF
Cliff face temple - GIF
Cliffside construction - GIF
Excavator suspended from crane working on cliff face - GIF

This was nowhere near a vertical cliff the excavator went down. The person filming the vid made it look like the cliff was a much steeper angle than it actually was. The proof is at .39 when you can see the many different levels of the mining cuts in the background.

Quote:

---

Originally Posted by Frank S

This was nowhere near a vertical cliff the excavator went down. The person filming the vid made it look like the cliff was a much steeper angle than it actually was. The proof is at .39 when you can see the many different levels of the mining cuts in the background.

---

And, at the beginning, there is no way the excavator could hold position on the cliff with it's boom extended and not just tip over. Using the hills in the background, this is more likely what it looks like:
Attachment 48484

That's about a 45 degree rotation...

Notice the clump of dirt falling off the leading edge to the track in the first 2 seconds. Corroborates the 45 degree rotation.

Trees and vegetation always grows up vertical. That's how you can tell what the angle really is.

Based on the eagle eye catches of Karl_H and Toolguy, I have updated the image to be a 54 degree rotation:
Attachment 48485

The operator is less remarkable as time goes on...

Another dead giveaway was he managed to halt his decent a couple of times.

Nobody cuts a road at that angle!

Attachment 48486

Don't suppose anyone noticed this one parked in the background?
Attachment 48622
I doubt it would be parked like this:
Attachment 48623