Mini mill slotting head
https://www.youtube.com/watch?v=GHVqjd-dti4
Printable View
Mini mill slotting head
https://www.youtube.com/watch?v=GHVqjd-dti4
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks PaulsGarageProjects! We've added your Mini Mill Slotting Head to our Milling category,
as well as to your builder page: PaulsGarageProjects's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-mini-mill-slotting-head"> <img src="/uploads/258275/homemade-mini-mill-slotting-head.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-mini-mill-slotting-head">Mini Mill Slotting Head</a> <span> by <a href="https://www.homemadetools.net/builder/PaulsGarageProjects">PaulsGarageProjects</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/mill'>mill</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Total click-bait!
The genius or creativity of the device is the reciprocating mechanism. Yet you purposely obscure
or leave out any clear indication of how it is accomplished! Offset bearings, cams, reversing motor controller, or . . . !!!
Quote:
Originally Posted by Saltfever
Apologies for the omission. Certainly not my intention to mislead.
It uses the stepper motor to drive the lead screw back and forth. It's connected to the lead screw through the pulleys and toothed belt.
The stepper motor is controlled by an arduino. It runs the motor in reverse to move the tool down, then forwards to move it back to the top of the stroke.