Multifunction workstation / Part 1: furniture and cooling system

[Eloy Workshop]

Hello everyone!!!

This is the first video of a quite complete project, where I will make many accessories for the vertical drill and I will try to make the most of it.

In this first video you will see how to take advantage of a scrap of a beam to use it as a piece of furniture, the front is equipped with drawers to store the bits and accessories of the drill, the front is stamped where we can see what each drawer contains.

In the back I have a tank of taladrina (the taladrina is used to cool and lubricate the machining of metal parts) inside this deposit we find a pump of 12V that will drive the taladrina through a flexible tube, the return will fall to the container and will go down the return pipe to a filter housed inside the tank, with this we will try to retain all the metal shavings.

For the regulation of the flow of the coolant, I have installed a speed regulator in addition to a switch where we can change the direction of rotation in case of blockage, the control panel is housed in the upper part of the furniture of the vertical drill.