Free 173 Best Homemade Tools eBook:  
Become a founding member: 500+ tool plans, full site access, and more.

User Tag List

Results 1 to 4 of 4

Thread: My 2.165 IE 55Mm Die stock build

  1. #1
    Supporting Member Frank S's Avatar
    Join Date
    Aug 2015
    Location
    Peacock TX
    Posts
    7,757
    Thanks
    1,010
    Thanked 6,229 Times in 2,975 Posts

    Frank S's Tools

    My 2.165 IE 55Mm Die stock build

    As usual when ordering specialty tooling such as taps and dies the newer stuff often has infused metric with imperial measurements.
    My 1" 20 TPI round die happens to be just one of those measuring in at 2.165" or 55 mm so obviously I needed a die stock for it as well
    So I made it nearly the same as my other one
    My 2.165 IE 55Mm Die stock build-img_20211228_162803dh.jpg
    My 2.165 IE 55Mm Die stock build-img_20211228_165016dh.jpg
    My 2.165 IE 55Mm Die stock build-img_20211228_170810dh.jpg
    One thing I always do when dressing an edge with a file on a lathe my file goes under the part and the tang is away from me. Doing this reduces any chance of an accident happening is the file should strike the chuck instead of possibly being hung in a jaw and tossed at me being under the part it would be pulled away from me there is also no chance the end of the file being hung into the side of a rotating jaw either
    My 2.165 IE 55Mm Die stock build-img_20211229_111029gh.jpg
    My 2.165 IE 55Mm Die stock build-img_20211229_151734dh.jpg

    173 Best Homemade Tools eBook
    Never try to tell me it can't be done
    When I have to paint I use KBS products

  2. The Following 2 Users Say Thank You to Frank S For This Useful Post:

    Jon (Dec 31, 2021), sossol (Dec 30, 2021)

  3. #2
    Content Editor
    Supporting Member
    DIYer's Avatar
    Join Date
    Aug 2013
    Posts
    3,076
    Thanks
    666
    Thanked 1,628 Times in 1,459 Posts


    Thanks Frank S! We've added your 55mm Die Holder to our Tapping and Threading category,
    as well as to your builder page: Frank S's Homemade Tools. Your receipt:




  4. #3
    Supporting Member Christophe Mineau's Avatar
    Join Date
    Jul 2014
    Location
    France, Brittany !
    Posts
    845
    Thanks
    651
    Thanked 1,503 Times in 446 Posts

    Christophe Mineau's Tools
    Good advice with the file, I need to remember that ! (the hardest part being to change your habits...)
    Cheers !
    Christophe
    ________________________________________________________________
    Visit my Website : http://www.labellenote.fr/
    Facebook : La Belle Note
    All my personal works, unless explicitly specified, are released under
    Creative Commons BY-NC-SA license.

  5. #4
    Supporting Member Frank S's Avatar
    Join Date
    Aug 2015
    Location
    Peacock TX
    Posts
    7,757
    Thanks
    1,010
    Thanked 6,229 Times in 2,975 Posts

    Frank S's Tools
    Quote Originally Posted by Christophe Mineau View Post
    Good advice with the file, I need to remember that ! (the hardest part being to change your habits...)
    It won't be hard if you ever have one tossed at you. back when I had several employees in the fabrication/ machine shop I owned at the time, one of my lathe operators, a machinist of about 25 years, was breaking the edge with a file when the end of it struck a jaw and sent the file across the shop. Fortunately that was all it did, I saw what happened and quizzed him about it. He said he was taught in machinist school to stand to the right of the tool post and hold the file away from his body incase it were to be struck by the jaws.
    I told him that I was autodidactic in almost everything except for how to wind the crank on a forge blower and swing a hammer against hot metal so everything i knew about machining I had to learn on my own, one of the things is if it is spinning away from you, it is impossible for something to be thrown at you.
    There are a lot of things in my life I don't do "according to Hoyle" I do them according to Frank.
    Most guys who come around my shop to do this or do that over the years and created the acronym, WWFD its kind of flattering at times.



    173 Best Homemade Tools eBook
    Last edited by Frank S; Dec 30, 2021 at 09:19 AM.
    Never try to tell me it can't be done
    When I have to paint I use KBS products

  6. The Following User Says Thank You to Frank S For This Useful Post:

    Christophe Mineau (Dec 30, 2021)

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •