Nyloc nuts

Hi all, I don't know if this has been covered before, If you have a Nyloc nut that wont hold because the locking material is not gripping:flame:, a medium tap with a hammer on the locking end of the nut will get you out of trouble :thumbsup:.
This action will squash the nylon lock a little and it will grip the thread tighter.
Cheers :D
Graham

Great tip Graham!! They can be frustrating especially if they're metric and don't have any replacements. Ran into that on fixing my shop chair the other day. Now I know what to do! Thanks!

~PJ