Old Angle Grinder Hack! Cutting... Grinding....

[HandmadeCreativeChannel]

Today I want to show you an amazing idea with an old angle grinder and a drill! Don't Throw Away the old Angle Grinder... Here's what you can do with it ... Cutting, polishing, sanding are no longer a problem.

[HandmadeCreativeChannel]

Please leave your comment, say what you think and what could be done for a better video project.

[HandmadeCreativeChannel]

Thank you for your time friends

[HandmadeCreativeChannel]

for those who will ask me why I didn't cut the axle at the base ...
I have something in mind for a future project with the same angle grinder.

[DIYer]

Thanks HandmadeCreativeChannel! We've added your Drill Powered Angle Grinder to our Grinding category,
as well as to your builder page: HandmadeCreativeChannel's Homemade Tools. Your receipt:

Drill Powered Angle Grinder by HandmadeCreativeChannel

tags: angle grinder, drill

[Tuomas]

Idea is great. But the gearing, when drill is placed to the motor axle..

Drops the rpm of the drill to 1/4 -1/3 of the drill speed.
So blade runs about 500rpm. I think it would be possible better if the angle grinder head would be used in the way that it increases saw blade speed, drills usually have enough torque allready. Then you could get 500rpm cordless drill to spin saw blade with more suitable 2000rpm. Just my toughts.

Idea is great and its easier to make this way, thumps up from that.