Printable View
Over-the-tire tracks.
<video controls autoplay loop> <source src="https://diqn32j8nouaz.cloudfront.net/truck_slipon_tracks_rd.mp4" type="video/mp4"> Your browser does not support the video tag. </video>
Previously:
https://www.homemadetools.net/forum/...557#post209163
https://www.homemadetools.net/forum/...591#post209266
https://www.homemadetools.net/forum/...056#post195183
https://www.homemadetools.net/forum/...536#post158863
https://www.homemadetools.net/forum/...121#post199396
Do they stretch the tread to get it on or do the axles move closer? I don't see an idle roller.
I have questions.
Just remove 1 outside tire stretch the track over the remaining tires then re install the tireQuote:
Originally Posted by Elizabeth Greene
I remember seeing similar on Sherman tanks in the 1950s.
Two different diameter tires! So only ONE axle is driven and the other is idling??
Most probably, either that or they have 2 different rear end ratios or the poor power divider is getting a real work out. One possibility is since the tracks there would be no need to ever lock in the power divider undersized tires may have been installed on 1 axle to achieve a lower final drive ratio without having to change the rear endsQuote:
Originally Posted by Saltfever