Printable View
Simple easy-to-make table saw jig that will let you cut perfect dados and rabbet with only the use of a single table saw blade. I had some leftover pieces from my last project. So I decided to make something out of it. This woodworking jig is made from scrap plywood and a few bits of hardware found in almost every workshop. Once set the Kerfmaker right, it works perfectly every time. Easy and repeated make dado slot & rabbet Joint
https://youtu.be/QZk2Mc8kq9Q
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks Didpoolhall! We've added your Kerfmaker to our Jigs category,
as well as to your builder page: Didpoolhall's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-kerfmaker-18"> <img src="/uploads/241532/homemade-kerfmaker-18.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-kerfmaker-18">Kerfmaker</a> <span> by <a href="https://www.homemadetools.net/builder/Didpoolhall">Didpoolhall</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/jig'>jig</a>, <a href='https://www.homemadetools.net/tag/kerf'>kerf</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Nice, thanks for posting. What was the purpose of the screw in the end, not sure what you were setting.
Ralph
The screw is for fine adjustment.
Thanks but fine adjustment of what? Why?
Ralph
The tightness or looseness. Moving the screw in or out changes the width of the cut.
I just need to watch the video a few more times.
Ralph