Pipe wrench from chain and box wrench - GIF

Pipe wrench from chain and box wrench.

<video controls autoplay loop> <source src="https://diqn32j8nouaz.cloudfront.net/chain_pipe_wrench_jl23.mp4" type="video/mp4"> Your browser does not support the video tag. </video>


Previously:

https://www.homemadetools.net/forum/...341#post218853
https://www.homemadetools.net/forum/...839#post175263
https://www.homemadetools.net/forum/...578#post212463
https://www.homemadetools.net/forum/...385#post208519
https://www.homemadetools.net/forum/...936#post202719

That's a really good and plausible idea.

Only because they didn't have a proper set of pump pliers

Quote:

---

Originally Posted by PDXsparky

Only because they didn't have a proper set of pump pliers

---

A lot of fittings have been scared with pump pliers because folks don't have enough grip to use them. Watched a guy nearly grind the teeth of a pair of pump pliers all the way through a rusty pipe fitting
But we all know that was a demonstration of concept the fitting wasn't even tight enough to scratch the paint.

I do not think I have ever seen a box wrench with that much angle on the end. But that is a good idea.