Printable View
Pneumatic can opener.
<video controls autoplay loop>
<source src="https://s3-us-west-1.amazonaws.com/hmt-forum/pneumatic_can_opener.mp4" type="video/mp4">
Your browser does not support the video tag.
</video>
Previously:
https://www.homemadetools.net/forum/...2579#post96643
https://www.homemadetools.net/forum/...179#post115843
https://www.homemadetools.net/forum/...054#post137980
https://www.homemadetools.net/forum/...909#post124696
https://www.homemadetools.net/forum/...5062#post81114
This looks to be either a 150 or 200 ml coke can. Given its size I'm going to go out on a limb and say this very probably done at one of the middle eastern universities. The experimental project would have been done as an extra credit project for a mechanical engineering under graduate coarse. If it were in fact done at one of those uni's I could probably narrow down the list to 2 or 3. As I had several student engineers use my machine shop while I was over in Kuwait to make similar projects.
Over all the smoothness and control of all of the functions were well executed