Free 186 More Best Homemade Tools eBook:  
Get 2,000+ tool plans, full site access, and more.

User Tag List

Results 1 to 10 of 10

Thread: Polly: a tool to remove carriage bolts.

  1. #1
    Supporting Member Philip Davies's Avatar
    Join Date
    Dec 2015
    Location
    Reading, Berks, UK
    Posts
    868
    Thanks
    1,184
    Thanked 1,019 Times in 342 Posts

    Philip Davies's Tools

    Polly: a tool to remove carriage bolts.

    Polly: a tool to remove carriage bolts.-dc8a8de1-60d8-4c5e-9235-0db2a47b1f96.jpg
    Here’s a carriage bolt that has to come out and the nut is stuck hard; the spanner merely rotates the bolt. This causes much “ vexation of spirit”.
    (I am quoting from “Practical Blacksmithing” Vol 2, complied by M T Richardson)

    Polly: a tool to remove carriage bolts.-image.jpg
    Here is a pair of pipe grips I have modified to grip the head of the carriage bolt.
    This is what a polly is supposed to look like.
    Polly: a tool to remove carriage bolts.-image.jpg
    I have neither the patience, the need nor the skill to make that.

    Polly: a tool to remove carriage bolts.-image.jpg. The prongs have been sharpened, although you can’t quite see that, it seems.Polly: a tool to remove carriage bolts.-image.jpg

    Polly: a tool to remove carriage bolts.-9ef6c7d2-8c2d-47b8-8669-6261795dbef4.jpg the first thing to do is to drive the lower jaws into the wood, by hammering on the end of the rein.
    Then

    Polly: a tool to remove carriage bolts.-71784966-d7b2-472a-aece-2ed1f0c9ff1d.jpg
    hammer the top jaws in on the other side, striking the back of the grips. This enables me to grip the bolt’s head firmly enough to remove the nut.
    Here is a view of the jaws, although I am sure they are more symmetrical, it must be the light!
    Polly: a tool to remove carriage bolts.-e74587ca-5534-4930-865a-1e0cf2c2e5e7.jpg.
    To spread the jaws, I put it in the forge, and bent them a bit inwards, a bit too much, it turned out, but a bit of filing remedied it. It’s normalised, I don’t suppose I shall harden it.

    186 More Best Homemade Tools eBook

  2. The Following 12 Users Say Thank You to Philip Davies For This Useful Post:

    Altair (Aug 26, 2019), Andyt (Aug 27, 2019), baja (Aug 27, 2019), Christofix (Aug 28, 2019), durrelltn (Feb 15, 2023), high-side (Aug 26, 2019), Jon (Aug 25, 2019), rebuilder1954 (Oct 28, 2021), rlm98253 (Aug 26, 2019), sossol (Aug 26, 2019), that_other_guy (Oct 28, 2021), threesixesinarow (Aug 30, 2019)

  3. #2
    Supporting Member Frank S's Avatar
    Join Date
    Aug 2015
    Location
    Peacock TX
    Posts
    11,178
    Thanks
    1,974
    Thanked 8,766 Times in 4,195 Posts

    Frank S's Tools
    Philip I remember we had a couple of polys at the blacksmith shop I worked at as a kid. It looks like yours is every bit as good if not better than they were

    2000 Tool Plans
    Never try to tell me it can't be done
    When I have to paint I use KBS products

  4. The Following User Says Thank You to Frank S For This Useful Post:

    Philip Davies (Aug 25, 2019)

  5. #3
    Supporting Member Philip Davies's Avatar
    Join Date
    Dec 2015
    Location
    Reading, Berks, UK
    Posts
    868
    Thanks
    1,184
    Thanked 1,019 Times in 342 Posts

    Philip Davies's Tools
    Thanks, Frank. I truly appreciate your compliment.

  6. #4
    Content Editor
    Supporting Member
    Altair's Avatar
    Join Date
    Aug 2013
    Posts
    11,727
    Thanks
    1,353
    Thanked 29,258 Times in 9,724 Posts


    Thanks Philip Davies! We've added your Carriage Bolt Removal Tool to our Miscellaneous category,
    as well as to your builder page: Philip Davies's Homemade Tools. Your receipt:




  7. #5
    Supporting Member gatz's Avatar
    Join Date
    Feb 2016
    Posts
    167
    Thanks
    2
    Thanked 144 Times in 50 Posts

    gatz's Tools
    Neat solution to a common problem.

  8. The Following User Says Thank You to gatz For This Useful Post:

    Philip Davies (Aug 26, 2019)

  9. #6
    Supporting Member
    Join Date
    Sep 2018
    Posts
    217
    Thanks
    4
    Thanked 43 Times in 38 Posts
    Reminds me of japanese nail pullers. I usually cut a slot in the head for a big screwdriver. But this would be handier if i ran into this often.

  10. The Following User Says Thank You to mbshop For This Useful Post:

    Philip Davies (Aug 28, 2019)

  11. #7
    Supporting Member mklotz's Avatar
    Join Date
    Aug 2015
    Location
    LA, CA, USA
    Posts
    3,434
    Thanks
    357
    Thanked 6,379 Times in 2,117 Posts

    mklotz's Tools
    Here's a commercial product that might provide the same capability...

    https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
    ---
    Regards, Marv

    Home Shop Freeware
    https://www.myvirtualnetwork.com/mklotz

  12. The Following User Says Thank You to mklotz For This Useful Post:

    Moldyjim (Nov 1, 2021)

  13. #8
    Supporting Member DIYSwede's Avatar
    Join Date
    May 2019
    Location
    Stockholm, Sweden...
    Posts
    634
    Thanks
    415
    Thanked 799 Times in 319 Posts

    DIYSwede's Tools
    Ah - just reminds me of the heavy duty nail puller of my sunny early teens -
    helping grandad out in taking a barn down in a coupla days:
    Polly: a tool to remove carriage bolts.-bahco-38.jpg
    A drop-forged slide hammer/ nail puller combo: where you put the jaws just outside the nail's head,
    and a few strokes down with the red sliding handle forces them down into the wood.
    Then just bend the handle (downwards in pic) so that the "boot heel" hits the floor, forcing the jaws round the head,
    and then further down pulling the nail out. Took every 5" nail out, though some broke half-way down in the beams.
    For crazy pulling force you could pull the handle up, getting a 1: 15 increase in leverage thru the 50" total handle extension.

    It really cost a fortune back in the sixties - developed by "Berndt August Hjort & Co", in Enköping, some 20 mi away from home.
    Still proved its worth when I, 20 years ago, painlessly took out two 45 sq m (485 sq ft) 1 1/2", 40 y old wooden floors in a day.
    And then: I'm still a tall, skinny, non-carpenter type to start with...
    "BAHCO 38" is its designation, and it costs app $100 today.

    Great concept and nicely done, Philip!

    Cheers
    Johan

  14. #9
    Supporting Member Philip Davies's Avatar
    Join Date
    Dec 2015
    Location
    Reading, Berks, UK
    Posts
    868
    Thanks
    1,184
    Thanked 1,019 Times in 342 Posts

    Philip Davies's Tools
    Yes, that is an excellent tool. As well as that, I have a compact one, 8”/9”, which has a lug on it, for the claw of your hammer. It’s often got me out of trouble, I always take it to work. Unfortunately doesn’t seem to be made now. I know it as a “parrot’s beak”.

  15. #10
    Supporting Member
    Join Date
    Jan 2016
    Location
    Southern tip of Vancouver Island
    Posts
    139
    Thanks
    957
    Thanked 39 Times in 28 Posts
    Quote Originally Posted by mbshop View Post
    Reminds me of japanese nail pullers. I usually cut a slot in the head for a big screwdriver. But this would be handier if i ran into this often.
    That is what I do as well, either by hacksaw or by thin angle grinder cutting disk. However, for rusted-on nuts, I apply penetrating fluid, then modify the head from circular to parallel flats by cutting along two parallel chords and removing the resulting minor segments. The new head is then gripped by whatever - small drill-press vise, crescent wrench, vise grips...



    186 More Best Homemade Tools eBook

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •