Printable View
Post setting method.
<video controls autoplay loop style="max-width: 100%;">
<source src="https://diqn32j8nouaz.cloudfront.net/tooltalk_17494200577857.mp4" type="video/mp4">
Your browser does not support the video tag.
</video>
Previously:
Concrete fence post removal tool - video
Hand cranked post puller - GIF
Mini excavator post driving attachment - GIF
Pneumatic post driver - GIF
Post mower and post washer GIFs
Stump and post puller - videos
Well, so long as all that suspended-in-midair framing is plumb...
right, doesn't show any fill; how does that work ?
He is demonstrating his method of holding and stabilizing the post with one hand, not building a whole deck.Quote:
Originally Posted by gatz
not a good demonstration if not applicable
His method worked perfectly did it not?Quote:
Originally Posted by gatz
Title is Post SETTING method.
How then, is the post SET; it's only located.
If you have an issue with the title and not the method then maybe just say that.Quote:
Originally Posted by gatz
If then have enough structure in place and anchored to support those posts, it is not difficult to put concrete in the hole AFTER hanging the post.
As long as you take the time to work the concrete under most of the post. You may not get full wood to concrete contact, you it is easy to get enough to support the load. One problem with doing it that way it dirt falling into the open home, then not bothering to remove it before the concrete.
The concrete should also NOT fill the hole, only fill in under the post, and a little up the side.