Power assist lift truck - GIF

Power assist lift truck.

<video controls autoplay loop>
<source src="https://s3-us-west-1.amazonaws.com/hmt-forum/power_assist_lift_truck.mp4" type="video/mp4">
Your browser does not support the video tag.
</video>


Previously:

https://www.homemadetools.net/forum/...614#post174318
https://www.homemadetools.net/forum/...612#post174310
https://www.homemadetools.net/forum/...177#post161180
https://www.homemadetools.net/forum/...234#post172751
https://www.homemadetools.net/forum/...978#post171812
https://www.homemadetools.net/forum/...902#post171503
https://www.homemadetools.net/forum/...836#post167609
https://www.homemadetools.net/forum/...082#post130059
https://www.homemadetools.net/forum/...721#post163358
https://www.homemadetools.net/forum/...294#post161561

Fine when there is clearance under the load, as here below trailer. It would be a great mounting rotary tables, lathe chucks, unwieldy tooling in general.

Quote:

---

Originally Posted by Toolmaker51

Fine when there is clearance under the load, as here below trailer. It would be a great mounting rotary tables, lathe chucks, unwieldy tooling in general.

---

Also fine as long as there is enough counter weight to balance the load as you are lowering it. Much like unloading a trailer with a skid steer just because you can pick ip while at height doesn't always mean you will be able to lower it to the ground with out tipping over