Printable View
Computer Numeric Control (CNC) is not possible without the machine knowing the location of reference surfaces on the stock. Here is a probe I use in my CNC mill, along with one of my Electronic Edge Finders. I adjusted the Total Indicated Runout to be less than +/- 0.0005 inches. There was no value in going tighter due to spindle runout.
If you are interested, please, click here.
Your comments are welcome. All of us are smarter than any one of us.
Thanks,
Rick
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks rgsparber! We've added your Edge Finder Probe to our Electronics category,
as well as to your builder page: rgsparber's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-edge-finder-probe"> <img src="/uploads/253304/homemade-edge-finder-probe.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-edge-finder-probe">Edge Finder Probe</a> <span> by <a href="https://www.homemadetools.net/builder/rgsparber">rgsparber</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/edge-finder'>edge finder</a>, <a href='https://www.homemadetools.net/tag/test-probes'>test probes</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->