Printable View
I had this carbide tipped cutoff tool that would not fit in the standard 250-007 holder.
A new holder was needed so using one of my new blanks I came up with this:
The original post for making the tool holder blanks is Here:
https://www.homemadetools.net/forum/...r-plans-104972
Cheers,JR
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks jjr2001! We've added your Cutoff Tool Holder to our Machining category,
as well as to your builder page: jjr2001's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-cutoff-tool-holder-4"> <img src="/uploads/273705/homemade-cutoff-tool-holder-4.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-cutoff-tool-holder-4">Cutoff Tool Holder</a> <span> by <a href="https://www.homemadetools.net/builder/jjr2001">jjr2001</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/tool-holder'>tool holder</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->