Printable View
I used to have an eccentric lock also DIY
Unfortunately, due to the small amount of space inside the eccentric, it could not be disputed. It affected his life badly - he bent over time.
For this I used an unusual but very effective solution
I admit that I modeled on the idea from Giovanni Maria Ferrari who used the chain and the gears from the stresses of the gears
https://youtu.be/c4QTkwNCoV4
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks Maszynotwór! We've added your Tailstock Locking Modification to our Lathes category,
as well as to your builder page: Maszynotwór's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="http://www.homemadetools.net/homemade-tailstock-locking-modification"> <img src="/uploads/221407/homemade-tailstock-locking-modification.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="http://www.homemadetools.net/homemade-tailstock-locking-modification">Tailstock Locking Modification</a> <span> by <a href="http://www.homemadetools.net/builder/Maszynotw%C3%B3r">Maszynotwór</a></span> </div> <div class="tags">tags: <a href='http://www.homemadetools.net/tag/lathe'>lathe</a>, <a href='http://www.homemadetools.net/tag/modification'>modification</a>, <a href='http://www.homemadetools.net/tag/tailstock'>tailstock</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Maszynotwór,
Very neat looking modification! Well done!