R8 collet block - video

Printable View

Mar 5, 2024, 04:01 PM
Jon

R8 collet block - video

R8 collet block. By Francisco Murcia Projects. 16:08 video:

https://www.youtube.com/watch?v=Ug-BBkhe5nw
Mar 6, 2024, 07:59 AM
nova_robotics

How did they maintain concentricity when they keep pulling the workpiece out of the chuck? Pull something out of a little three jaw chuck like that and you can expect to lose at least 2-3 thou. I would want that R8 holder to be within a few tenths. Ah well, probably better than the ER32/ER40 holders you can find on Amazon. I bought a few of those and you could measure the runout with a tape measure.
Mar 6, 2024, 10:03 AM
WmRMeyers

Quote:

Originally Posted by nova_robotics

How did they maintain concentricity when they keep pulling the workpiece out of the chuck? Pull something out of a little three jaw chuck like that and you can expect to lose at least 2-3 thou. I would want that R8 holder to be within a few tenths. Ah well, probably better than the ER32/ER40 holders you can find on Amazon. I bought a few of those and you could measure the runout with a tape measure.

I'm sure there are people who are capable of doing things like that accurately with less-than-best equipment. I don't believe I would be one of them. ;)