Rivet nut setter - video

[Jon]

Rivet nut setter. By RaineX Forge Studio. 4:58 video:

[uv8452]

In the case of small threads (5mm and lower) or an emergency one can (temporalily) modify a pop rivet tong: Remove the threaded plug, then the spring, then the 2 or 3 claws and the 'mouth'. Then insert from the top opening a bolt with the desired thread (washer under the head) and appropriate lenght. Screw a rivet nut onto the bolt for not losing bolt and washer. (Yes: I have a 2nd tong plus bolts with knurled large heads just for riveting nuts.)

[that_other_guy]

Does anyone understand this "fad" of MIG welding with spot, spot, spot, spot, spot?

Why not just set the correct voltage and wire speed and do a weld bead?

I get that maybe you cannot get around the circle in one pass without a positioner, but certainly three arcs will do.

I see it on many yt videos and wonder is it just one of those "I learned to weld on yt" things?

Thanks,
Brian