Roller knife from meat grinder grate. By Mr Deddy. 7:12 video:
https://www.youtube.com/watch?v=SIfEWyhDdyc
Printable View
Roller knife from meat grinder grate. By Mr Deddy. 7:12 video:
https://www.youtube.com/watch?v=SIfEWyhDdyc
I like this tool a lot. I have 2 meat grinder grates, but mine have notches, not lugs. So either I must grind 1/8” off the radius, or weld infill, and grind that back, which would be a soft spot. My preferred handle would be wooden, but Mr Deddy’s looks super. He must recharge his batteries often! I have not come across a chuck to fit to an angle grinder before.Quote:
Originally Posted by Jon
Some of the lighter duty 4inch angle grinders had 10mm threaded arbors You could probably recut the threads in a chuck that had 3/8 threads or find one that was threaded to 10 mm. Or drill out the taper in a pressed on chuck and thread it to 5/8 11 TPIQuote:
Originally Posted by Philip Davies
Philip, if you do make one, do me a favor and include a sheet metal hand guard on the handle so a quick stop of the roller doesn't allow your hand to slide forward into the blade.Quote:
Originally Posted by Philip Davies
Thanks, a bit of brass looks nice with rosewood.Quote:
Originally Posted by mklotz