Printable View
Rotating head copper tubing cutter.
<video controls autoplay loop> <source src="https://diqn32j8nouaz.cloudfront.net/copper_tubing_cutter_tp.mp4" type="video/mp4"> Your browser does not support the video tag. </video>
Previously:
https://www.homemadetools.net/forum/...549#post170231
https://www.homemadetools.net/forum/...799#post198273
https://www.homemadetools.net/forum/...997#post198925
https://www.homemadetools.net/forum/...986#post198892
https://www.homemadetools.net/forum/...008#post184006
No thanks, I'll stick with my ridgid 29963 cutter At least it won't ever have a dead battery. and I can cut stainless with it
It's only a hundred bucks, fits in a wall cavity (hand held can never do that), I know how to plug in a battery charger, I just ordered mine.
I'll give you that, plus I can see where a tradesman doing new construction would benefit in the labor savings on a daily basis especially if it had a built in debur and/or swedging attachment, but that might be self defeating from the added bulk. For someone like me who rarely does copper plastic or aluminum not so much.Quote:
Originally Posted by bob_3000
I mostly do stainless hydraulic tubing and Milwaukee may offer cutter wheels for stainless I haven't checked.
For the odd times when I have to do wall cavity work I have an old one of these
Attachment 42256
Mine though is about 30 years old and it will fit in my pocket
It's all very well cutting pipe in a wall cavity, but then you have to get in there to join it to something else.
https://www.bes.co.uk/kopex-pipeslic...ter-15mm-7763/ and add a motor?
I have mini 1/8" through to 6" conventional cutters like the Ridgid Frank S pictures above, though I mainly use a Swagelok one for s/s tube work.
