Self-loading Bobcat GIF

[Jon]

GIF of a Bobcat self-loading into a truck.

[PJs]

Mad Driving skills! Very Cool! Got a friend that can drive one of those things like that and where most people wouldn't be able to walk! Saw him get up on two side wheels on a Very Steep Grade and do a similar thing with the bucket to right himself and end up right where he was working next. Blew me away. Thanks Jon, Great find!

[mklotz]

At the start of the gif he faces the truck and rolls back and forth a few times. Is that to leave tracks in the dirt to aid him in aligning to the truck when he approaches it backwards while tilted forward?

We had a contractor remove sidewalk panels for replacement with a Bobcat. He had to approach perpendicular to the curb, climb up on it, reach over the parkway, then stick the forks under the panel and lift it to carry it out to the street. (I had warned him that if he disturbed my wife's flowers planted in the parkway, she would probably emasculate him with a potato peeler.) Once out in the street he expertly tossed it a few inches above the forks, let it fall back and thus cracked it in half. He kept repeating this breakup process with the pieces until they were too small to span the forks.

I told him he was a mechanical artist of the highest degree. His co-workers had a bit of trouble translating that into Spanish, but, when they did, his face lit up like a searchlight.

[PJs]

At the start of the gif he faces the truck and rolls back and forth a few times. Is that to leave tracks in the dirt to aid him in aligning to the truck when he approaches it backwards while tilted forward?

We had a contractor remove sidewalk panels for replacement with a Bobcat. He had to approach perpendicular to the curb, climb up on it, reach over the parkway, then stick the forks under the panel and lift it to carry it out to the street. (I had warned him that if he disturbed my wife's flowers planted in the parkway, she would probably emasculate him with a potato peeler.) Once out in the street he expertly tossed it a few inches above the forks, let it fall back and thus cracked it in half. He kept repeating this breakup process with the pieces until they were too small to span the forks.

I told him he was a mechanical artist of the highest degree. His co-workers had a bit of trouble translating that into Spanish, but, when they did, his face lit up like a searchlight.

Not sure about the tracks Marv but maybe. I watched his head movement a couple of times and he might be referencing the far side track, then once up he looks over his right shoulder.

The question I have is: did he drive it off the truck in the first place? That may have been more tricky than the back up without going end over tea kettle.

Nice/fun story about your contractor and the Kudo's to his artistry! Thanks.

Regards, ~PJ

[volodar]

¨At the start of the gif he faces the truck and rolls back and forth a few times. Is that to leave tracks in the dirt to aid him in aligning to the truck when he approaches it backwards while tilted forward?¨


I´ll remember that...my windshield mirror isn´t of much use when pointed at the sky.

[Frank S]

I've ran many skid steer loaders over the years once in a tunnel with a round bottom bucket to remove the muck produced by a tunnel boring machine I needed to do some repairs on the TBM but in order to even get to it several scoops of muck had to be transported 100 yards out of the tunnel. I l learned real quick just how easy it would be to wind upside down in a round 6 ft. diameter tunnel if you weren't careful the good thing was when I did wind up with the machine on its side the small size of the tunnel was all that was needed to right myself major scary when I did it though.
The first time I ever saw acrobatics done with a Bobcat was in 1970 at the State fair they had this bikini clad woman in one on a 10 ft round stage making the thing dance I don't know how well she would have done at a construction site but I was sure hoping her wobbly bits would bounce out of her top LOL

[C-Bag]

that IS insane! Good eye Marv, I had no idea what he was doing till I read your re:

An yeah PJ, how DID he get that thing out of the back of the dump truck? The other hmmmmm? is how do those things still pick up oil out of the pan at such extreme angles?..

[suther51]

The other hmmmmm? is how do those things still pick up oil out of the pan at such extreme angles?..

Had the same thought, my father wondered if skid-steer motors run a dry sump oil pan, have not had a chance to ask any one yet that might know.
Eric

[Jon]

I believe this may be Albania.

[Frank S]

I never heard of any with a dry sump but a lot of them have a deep narrow sump