https://youtu.be/7ZrheqwlkUU
Printable View
Mi fa molto piacere
Might be usefull if it was written in English, instead of garbage.
ci sono i sottotitoli in tutte le lingue, basta solo attivarle
<!-- BEGIN /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
Thanks fergiomaria! We've added your Drill Press Laser Guide to our Drilling and Drill Presses category,
as well as to your builder page: fergiomaria's Homemade Tools. Your receipt:
<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-drill-press-laser-guide-3"> <img src="/uploads/258464/homemade-drill-press-laser-guide-3.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-drill-press-laser-guide-3">Drill Press Laser Guide</a> <span> by <a href="https://www.homemadetools.net/builder/fergiomaria">fergiomaria</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/drill-press'>drill press</a>, <a href='https://www.homemadetools.net/tag/laser'>laser</a> </div> </div> </div> </div>
<!-- END /var/www/html/homemadetools/protected/modules/zeus/views/tool/postUpdate.php -->
grazie mille
Now I see what you did there, you took two lasers with line outputs, puth them at 90 degrees to each other with your collar and you turn the laser to where the line intersects the drill spot. For a drill press, this is a good solution! Thanks!
sono contento che ti piaccia