SHOP PRESS MODIFICATION / NEW AIR HYDROLIC JACK

Printable View

Feb 28, 2020, 08:26 PM
Captainleeward

5 Attachment(s)

SHOP PRESS MODIFICATION / NEW AIR HYDROLIC JACK

SHOP PRESS MODIFICATION/NEW HARBOR FREIGHT AIR HYDROLIC JACK

Attachment 33783 Attachment 33784 Attachment 33785
Attachment 33945 Attachment 33946
Feb 28, 2020, 10:24 PM
Frank S

I've had a pneumatic bottle jack on my shop press for many years. Once you get used to it you will wonder why you hadn't upgraded years ago.
Feb 28, 2020, 10:34 PM
Captainleeward

Hi Frank...i know I am feeling that already good luck on your shop build ....looking good Cap
Feb 28, 2020, 11:49 PM
Frank S

Quote:

Originally Posted by Captainleeward

Hi Frank...i know I am feeling that already good luck on your shop build ....looking good Cap

Thanks Cap, it is hard to tell how many are following the build. had a friend of mine try to tell me how I should do this or should do that. of course the biggest thing he has ever built was a dog house for his German shepherd with all new materials, but he claims to have watched every u tube vid on construction ever published. I suppose that qualifies him as an expert just like I should be qualified to pilot the Antonov 225 just because I have flown a Cessna 182 He stopped coming over when I told him that I would gladly pay him $25.00 an hour to help hold the purlins on the trusses while I welded them. once he figured out we could be 25 feet off the ground and 8 feet above the scaffolding
Feb 29, 2020, 01:22 AM
DIYer


Thanks Captainleeward! We've added your Shop Press Jack Modification to our Brakes and Presses category,
as well as to your builder page: Captainleeward's Homemade Tools. Your receipt:

<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="https://www.homemadetools.net/homemade-shop-press-jack-modification"> <img src="/uploads/229873/homemade-shop-press-jack-modification.jpeg"/> </a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="https://www.homemadetools.net/homemade-shop-press-jack-modification">Shop Press Jack Modification</a> <span> by <a href="https://www.homemadetools.net/builder/captainleeward">Captainleeward</a></span> </div> <div class="tags">tags: <a href='https://www.homemadetools.net/tag/bottle-jack'>bottle jack</a>, <a href='https://www.homemadetools.net/tag/pneumatic'>pneumatic</a> </div> </div> </div> </div>
Feb 29, 2020, 02:05 AM
Captainleeward

Hi Frank, ha ha ha ha thats a interesting story guys like you and me can build anything even if I do say so myself.....HA Ha HA...Thanks for you presence today needed a good laugh....Cap still verticle at 70. cap.
Mar 2, 2020, 04:59 PM
Chips O'Tool

Air is the best.

I have a surprisingly helpful addition to make, for people who keep their jack handles just in case. If you put one rare earth magnet on each end of the upper crossmember on the press, you can put the handle up there when you're not using it, and it will snap into place and stay there.
Mar 2, 2020, 06:47 PM
Captainleeward

Hi Chips O'Tool, That is a perfect idea I'll use it if you don't mind? Cap.
Mar 9, 2020, 09:04 AM
marksbug

Ive got air too. as well as wire baskets at the top sides to hold smaller press tools out of the way and eazely seen and retrieved for pressing. now to get the wench on it somewhere to raize&lower it...I also have to cut apart the pressing bed and square it up good...might even make it so bigger dia. objects can be pressed
Mar 9, 2020, 10:42 AM
Captainleeward

Lets see a picture of yours....Cap.
Mar 9, 2020, 12:30 PM
marksbug

it's just a china 20 ton press with baskets&air powered. someday Ill finish making it the way I want it to be. as it is now..it's just depressing:rimshot: