Shop Press--Sheet metal Punch attachment.

Shop Press--Sheet metal Punch attachment.

This attachment slides on the horizontal shop press bar, and has a slider for the forward and backward movement. the slider is made up of 1/2 inch crs with a 3/4 hole drilled in the middle for a dowel that sticks up
1/8 of an inch for the bottom die to rest in. The upper die is threaded into the ram rod.
All that is left to do is to center the bottom die with the upper die now you can cut your hole in the sheet metal.
I made sure my ram rod is square to the punch or bad things will happen.:headshake:

Attachment 2689Attachment 2690Attachment 2691Attachment 2692Attachment 2693Attachment 2694Attachment 2695

Nice, what's your rating on capacity?

I'm using a 12 ton jack for this shop press.

I'm sorry, I should have been more clear. What thickness of material do you think you can punch with the setup?

The sheet metal I used was .035 thick. The dies can't take much more than that.

Cool idea for a press attachment, Captain! Thanks for the idea.

You are Welcome. :welcome:

Hi, well done captain !
The dies are purchased ?

Yes they are Christophe, Wow you climbed up the ladder fast can"t catch you any more...:lol:

Thanks Captainleeward! I've added your Sheetmetal Punch Attachment to our Brakes and Presses category, as well as to your builder page: Captainleeward's Homemade Tools. Your receipt:

<div id="blocks"> <div class="block b1 pngfix"> <div class="bimg"> <div> <a href="/sheetmetal-punch-attachment"><img src="/uploads/106394/sheetmetal-punch-attachment.jpeg" alt="Sheetmetal Punch Attachment" /></a> </div> </div> <div class="head pngfix"></div> <div class="left pngfix"></div> <div class="right pngfix"></div> <div class="blockover b1 pngfix"> <div class="title"> <a href="/sheetmetal-punch-attachment">Sheetmetal Punch Attachment</a> <span> by <a href="/builder/captainleeward">Captainleeward</a></span> </div> <div class="tags"> tags: <a href="/tag/punch">punch</a>, <a href="/tag/shop-press">shop press</a> </div> </div> </div> </div>

Thanks Ken....:O)

Captain,
That is impressive and a great design. I can tell that a lot of thought and experience went into building the shop press and punch attachment.
Thanks, Paul

Paul You are to kind....:rofl:

Nice project. Well done Cap'n. Time to make some shop press tooling!

Al

So True......:lol: