Free 186 More Best Homemade Tools eBook:  
Get 2,000+ tool plans, full site access, and more.

User Tag List

Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11

Thread: Retrofitting and old benchtop CNC mill - Town Labs 512

  1. #1
    Supporting Member
    Join Date
    Feb 2019
    Posts
    24
    Thanks
    0
    Thanked 50 Times in 8 Posts

    Rusty Knuckles's Tools

    Retrofitting and old benchtop CNC mill - Town Labs 512

    This machine was my first attempt with a CNC. It's not the best designed tool out there and the company seems to be gone as I can't find the website anymore but it was almost free by the time it got to me. After I first got it I used it for several months making a few things but eventually spent more time tweeking it to get it to work correctly than using it so it was shelved. By then I was confident enough by then to drop a knot of money on a Tormach .

    Anyway, I found in my stash a Probotix 3-axis kit that I bought for a long abandoned CNC router project. Even though I don't really have a planned use for this machine if I can get it to work with the retrofit then I think the experience of doing this small one will help me decide if I want to tackle a larger machine that I have the also needs a retrofit but that I have to buy parts for.

    Guess I'll find out!


    Retrofitting and old benchtop CNC mill - Town Labs 512-overall1.jpg

    Retrofitting and old benchtop CNC mill - Town Labs 512-overall2.jpg

    Retrofitting and old benchtop CNC mill - Town Labs 512-zmotor.jpg

    Retrofitting and old benchtop CNC mill - Town Labs 512-apart.jpg

    Retrofitting and old benchtop CNC mill - Town Labs 512-head.jpg


    And a video of the disassembly if that interest you.


    186 More Best Homemade Tools eBook

  2. The Following User Says Thank You to Rusty Knuckles For This Useful Post:

    thehomeengineer (Oct 17, 2019)

  3. #2
    Supporting Member thehomeengineer's Avatar
    Join Date
    Nov 2017
    Location
    Berkshire UK
    Posts
    704
    Thanks
    720
    Thanked 2,050 Times in 405 Posts

    thehomeengineer's Tools
    Hi Rusty Knuckles
    I will be very interested in following this project as I am also looking to convert and retro fit a 3 axis CNC conversion to a mill I picked up cheap. I am going to have to get all the bits and pieces and I am thinking about using the Mach 3 software. The leadscrews will also be changed from Acme to ball screws (16mm)
    Great video and looking forward to the next one
    The Home Engineer

    2000 Tool Plans

  4. #3
    Supporting Member
    Join Date
    Feb 2019
    Posts
    24
    Thanks
    0
    Thanked 50 Times in 8 Posts

    Rusty Knuckles's Tools
    Thanks! Mine's been on the been on the back burner for a few years as I was intimidated by it. So far it's been no big deal but we'll see once it's all wrapped up if I still feel the same or not

  5. The Following User Says Thank You to Rusty Knuckles For This Useful Post:

    thehomeengineer (Oct 18, 2019)

  6. #4
    Supporting Member thehomeengineer's Avatar
    Join Date
    Nov 2017
    Location
    Berkshire UK
    Posts
    704
    Thanks
    720
    Thanked 2,050 Times in 405 Posts

    thehomeengineer's Tools
    I am currently playing with an Arduino to control a rotary table. It is going OK but without the help of our young apprentice with the code and electronics I would be lost. There is a lot of information on the net but you still have to understand what you are reading. Electronics is a bit modern for an old mechanical engineer like me who is used to nuts and bolts but I will get there just not that quickly.
    I have enjoyed the challenge and having someone there to explain things has been invaluable and I have learnt a lot in a short time (Well I think I have learnt a lot )
    Once the rotary table is working correctly I am going to have a go at the mill.
    Will keep you updated
    The Home Engineer

  7. #5

    Join Date
    Dec 2017
    Posts
    17
    Thanks
    0
    Thanked 9 Times in 6 Posts

    lodola235's Tools

    drive software

    Hi,
    can you tell some moer about the software and the elektronica please

    intersting project
    Bart

  8. #6
    Supporting Member
    Join Date
    Feb 2019
    Posts
    24
    Thanks
    0
    Thanked 50 Times in 8 Posts

    Rusty Knuckles's Tools
    Yea, as I get older it seems technology passed me by while I was sitting in a cubicle at work. I know when I was younger I would have been all over this new stuff if it had came out back then. Just some catching up to do I guess.


    Thanks Bart, all the electronics came as a kit from Probotix about 5 years ago or so. Looks like they don;t sell my kit anymore but it's similar to this - https://www.probotix.com/CNC-CONTROL...tor-Driver-Kit

    Came with pretty good instructions too so hopefully I can get it sorted out

    The software I'll be using is Mach 3 and from what I hear that's pretty simple too; at least for a simple setup. I should know more in a week or two.

  9. #7
    Supporting Member
    Join Date
    Feb 2019
    Posts
    24
    Thanks
    0
    Thanked 50 Times in 8 Posts

    Rusty Knuckles's Tools
    I got another day of work in on the tiny mill. Just some assembly but it has to go back together before it'll work!



    Retrofitting and old benchtop CNC mill - Town Labs 512-1.jpg

    Retrofitting and old benchtop CNC mill - Town Labs 512-2.jpg

    Retrofitting and old benchtop CNC mill - Town Labs 512-3.jpg

    Retrofitting and old benchtop CNC mill - Town Labs 512-4.jpg

    Retrofitting and old benchtop CNC mill - Town Labs 512-5.jpg

    Retrofitting and old benchtop CNC mill - Town Labs 512-6.jpg





  10. The Following User Says Thank You to Rusty Knuckles For This Useful Post:

    thehomeengineer (Oct 21, 2019)

  11. #8
    Supporting Member thehomeengineer's Avatar
    Join Date
    Nov 2017
    Location
    Berkshire UK
    Posts
    704
    Thanks
    720
    Thanked 2,050 Times in 405 Posts

    thehomeengineer's Tools
    Great video again

  12. #9
    Supporting Member
    Join Date
    Feb 2019
    Posts
    24
    Thanks
    0
    Thanked 50 Times in 8 Posts

    Rusty Knuckles's Tools
    Thanks!! Should get to some good stuff in the next one; wiring and testing and whatnots.

  13. #10
    Supporting Member
    Join Date
    Feb 2019
    Posts
    24
    Thanks
    0
    Thanked 50 Times in 8 Posts

    Rusty Knuckles's Tools
    Not many more pictures to show as the machine still looks mostly the same since the last update but here's a video of the wiring process and some testing.


  14. The Following User Says Thank You to Rusty Knuckles For This Useful Post:

    Rikk (Nov 6, 2019)

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •