Free 186 More Best Homemade Tools eBook:  
Get 2,000+ tool plans, full site access, and more.

User Tag List

Results 1 to 2 of 2

Thread: Open Source 3-D Printable Probe Positioners and Micromanipulators for Probe Stations

  1. #1
    Supporting Member MOST's Avatar
    Join Date
    Aug 2017
    Posts
    59
    Thanks
    8
    Thanked 74 Times in 28 Posts

    MOST's Tools

    Open Source 3-D Printable Probe Positioners and Micromanipulators for Probe Stations

    Approaches to Open Source 3-D Printable Probe Positioners and Micromanipulators for Probe Stations

    Three types of highly-customizable open source probe positioning systems are evaluated: (a) mostly 3-D printed, (b) partially printed using OpenBeam kinematic constraints, and (c) a 3-level stack of low-cost commercial single axis micropositioners and some printed parts. All systems use digital distributed manufacturing to enable bespoke features, which can be fabricated with RepRap-class 3-D printer and easily accessible components. They are all flexible in material choice for custom components. The micropositioners can be set up for left-right use and flat or recessed configurations using either mechanical or magnetic mounting. All systems use a manual probe holder that can be customized and enable a quick swap probe system. System (a) is purchased for $100 or fabricated for <$5, (b) fabricated for $25, and (c) fabricated for $145. Each full turn of a knob moves an axis 0.8 mm for (a) and 0.5 mm for (b,c) providing externally measured positional control of 10 microns for the latter. All three designs can utilize a customizable probe holder and tungsten carbide needle for $56. The designs are validated using microchips with known feature sizes and underwent mechanical stress tests. The maximal deflection of (a) was >200 microns, (b) 40 microns and (c) 10 microns. A tradeoff is observed for 3-D printed percent between cost and accuracy. All systems provided substantial cost savings over proprietary products with similar functionality.

    Open Source 3-D Printable Probe Positioners and Micromanipulators for Probe Stations-500px-probes.jpg

    To learn more about this project, visit the project page on Appropedia:
    https://www.appropedia.org/Approache...Probe_Stations

    Here is the download to the paper:
    https://www.academia.edu/37525103/Ap...probe_stations

    186 More Best Homemade Tools eBook

  2. The Following User Says Thank You to MOST For This Useful Post:

    Altair (Nov 17, 2019)

  3. #2
    Content Editor
    Supporting Member
    Altair's Avatar
    Join Date
    Aug 2013
    Posts
    11,723
    Thanks
    1,353
    Thanked 29,236 Times in 9,716 Posts


    Thanks MOST! We've added your Probe Station Positioners and Micromanipulators to our Electronics category,
    as well as to your builder page: MOST's Homemade Tools. Your receipt:




    2000 Tool Plans

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •