LinkBack URL
About LinkBacks
Thanks Tuomas! We've added your Vise to our Vises category,
as well as to your builder page: Tuomas's Homemade Tools. Your receipt:
Thanks Tuomas! We've added your Vise to our Vises category,
as well as to your builder page: Tuomas's Homemade Tools. Your receipt:
Congratulations Tuomas - your Multipurpose Vise is the Homemade Tool of the Week!
Another big week around here with many excellent builds, but this is a very impressive vise.
Some more good builds from this week:
Dremel EZ Lock Sanding Disc by mklotz
2" Belt Sander by tekcraft
Shop Heater by warsztatOdZera
Chain Bender by mariost
Letter Stamping Jig by dekeros
Pickup Hauling Rack by Frank S
Plasma Table by Captainleeward
Toe Jack by Maszynotwór
Welding Table by PowerMk
Arbor Press to Broach Press Modification by Me2
Tailstock by ttmrj
Plastic Filament Extruder by MOST
Hose Coiling Method by rgsparber
Ball Pattern Tool by Kovanca Polock
Angle Grinder Vacuum Port by Kwandotechnic
Plastic Granulator by MOST
Thermal Camera and Smartphone Mount by Keith William Knull
3D Printable Centrifuge by MOST
Crosscut Jig by Didpoolhall
Visually Impaired Navigation Assistant by MOST
Tuomas - you'll be receiving a $25 online gift card, in your choice of Amazon, PayPal, or bitcoin. Please PM me your current email address and gift card choice and I'll get it sent over right away.
This is your 11th Homemade Tool of the Week win. Here are all of your Homemade Tool of the Week winning tools. Congrats again
HomemadeTools.net founder (2012) and CEO
Join thousands of us, and start building your own tools today.
Beserkleyboy (Nov 18, 2019)
Thank you very much Jon, and the ones that voted by clicking thanks button.
This build will be continued.
At the next week or after that.
Made a mount for the vise.
Material is 10 x 50mm steel.
It connects to vise with four M8 bolts.
Jon (Nov 19, 2019)
I have couple ideas for motorising the jack.
Allthougt, i don't want to build whirlygig around it.
Here is the idea about the first version.
https://www.instagram.com/p/B5FVToMg...d=wupu865ic2x9
Unless some modifications were made to the jack you are going to have problems with it operating, to use a jack on its side the pump has to be on the bottom, or the bottle has to be over filled.
I use this same way that i have used earlier.Originally Posted by Hans Pearson
This time extra container is integrated to the jack...
( Sounds weird, but that's what i planned)
That would work.
Tuomas (Nov 20, 2019)
Extra container for the jack.
Now it works better on sideways.
Material is 1,5mm stainless steel.
Jon (Nov 26, 2019)
Short clip about testing with modified hydraulic jack..
Jack is still unfastened, that makes using little tricky. Also handle is too short, and with little too small diameter...
But it works like expected. Now i can go forward...
Extra container is weld to the original container trough the hole, where i later placed the cap fitting.
This gives little extra room for welding. Cap fitting was weld on its place after containers we're densely weld together.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
Bookmarks